This meter can be configured to work with a wide range of CTS, giving the unit a wide range of operation. Built-in interfaces provide pulse and RS485 Modbus R TU outputs. Configuration is password protected.

This unit has 2 Source Powers and can show Tl energy and T 2 energy. If you want to shift Tl to T 2, as far as there is 230V load between terminal 7 and 8, the meter will count up to T 2. When Tl is working, you can get Pulse 1 output 2 from pin 9 & 10. When T 2 is working, you can get Pulse 2 output from pin 11 & 12. Both Pulse 1 output and Pulse 2 output Rate are configurable.

This provides two pulse OUtPUtS that clock up measured Tl active energy and T 2 active energy. The default constant for active energy is 3200imp/kWh. The pulse width for active energy can be set from the set-up menu.